Danilo wind farm is situated in Dalmatia, Croatia. It was created in 2014 and is owned by .
It is near Near the town of Sibenik, about 15km from the Adriatic Sea.
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best destination for something similar to Danilo would be a steady supply of non-turbulent wind. An important factor of turbine siting is furthermore admission to local requirement or transmission capaNear the town of Sibenik, about 15km from the Adriatic Sea.
During the planning stages the Danilo wind farm would have been checked and confirmed through wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been crucial to determining site potential in order to fund the project. Winds around Near the town of Sibenik, about 15km from the Adriatic Sea are analysed for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playwithin a project like Danilo. This is due to drag The boost in velocity with altitude is most extraordinary close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is also more evident near land and is altered by landscape, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Danilo turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric energy is elevated in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.