It is near Xilin Gol.
See below for data.
As a rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or more.
An ideal destination for a project like Duolun Daxishan III might have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine China Datang Corporation (CDT) like China Datang Corporation (CDT) associated if Duolun Daxishan III was not built near local demand or transmission capaXilin Gol.
Before development, Duolun Daxishan III was almost certainly screened on the foundation of a wind atlas, and validated with wind specifications. However, Duolun Daxishan III wind farm would have needed more than just meteorological data and measurements.
Site info around Xilin Gol would have been a major factor in the development conclusion Winds around Xilin Gol are analysed for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind blows more rapidly at higher altitudes due to the reduced effect of drag. The surge in velocity with altitude is most remarkable close to the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is more pronounced near land and is altered by landscape, surface and obstacles.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But this isn’t necessarily the case in hilly areas.
Duolun Daxishan III turbines are connected via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.