It is near Dumon.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best location for something similar to Dumon Phase III is a steady availability of non-turbulent wind. Additionally, you would not get a turbine China WindPower like China WindPower involved if Dumon Phase III was not built near local demand or transmission capaDumon.
Before building, Dumon Phase III was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential as a way to fund the project. Local winds are often monitored for a year or more, and comprehensive wind maps constructed before wind generators are installed.
Altitude would also have a part to performwithin a project like Dumon Phase III. This is because of drag The surge in velocity with altitude is most remarkable near the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more distinct near land and is altered by geography, surface and obstacles.
Typically, the increase of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Dumon Phase III turbines are linked via medium voltage lines and communications.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each turbine site.