Dingbian Fanshigou Phase I wind project was installed in Shaanxi, China It was brought online in 2010 and is owned by .
It is near Baiyu, Dingbian.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best destination for something similar to Dingbian Fanshigou Phase I would be a steady supply of non-turbulent wind. An important factor of turbine siting is moreover admittance to local demand or transmission capaBaiyu, Dingbian.
Before building, Dingbian Fanshigou Phase I was most likely screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Site information around Baiyu, Dingbian is a major element in the development final decision Local winds are often supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also possess a part to playwithin a project like Dingbian Fanshigou Phase I. This is because of drag The surge in velocity with altitude is most dramatic near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is more obvious near land and is altered by terrain, surface and hurdles.
Usually, the growth of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Individual turbines at Dingbian Fanshigou Phase I are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Dingbian Fanshigou Phase I wind farm
- Name: Dingbian Fanshigou Phase I
- Wind turbine Supplier: Mitsubishi Corporation, Model: MWT1000-57, Units: 45,
- Country: China
- Developer: China Guodian
- State: Shaanxi
- City: Baiyu, Dingbian