It is near Wuchuan County.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A perfect location for a project like Dayuanshan could have a near constant flow of non-turbulent wind all year round, with a minimum probability of abrupt potent bursts of wind. An essential aspect of turbine siting is also admission to local demand or transmission capaWuchuan County.
During the planning stages the Dayuanshan wind farm would have been checked and endorsed through wind measurements. However, Dayuanshan wind farm might have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential in order to finance the project. Winds around Wuchuan County are examined for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playwithin a project like Dayuanshan. This is because of drag The rise in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is altered by landscape, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This Inner Mongolias wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, increases the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. But micrositing maximizes placement, specifically in hilly areas.
Dayuanshan turbines are related via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each turbine site.