It is near Dabancheng wind field.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something similar to Dabancheng I (CPI) is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine China Power Investment Corporation like China Power Investment Corporation associated if Dabancheng I (CPI) was not built near local demand or transmission capaDabancheng wind field.
Before development, Dabancheng I (CPI) was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been imperative to determining site potential to be able to fund the project. Local winds are frequently watched for a year or more, and comprehensive wind maps constructed before wind generators are installed.
Altitude would also have a part to playin a project like Dabancheng I (CPI). This is because of drag The increase in velocity with altitude is most remarkable close to the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is more pronounced near land and is altered by landscape, surface and obstructions.
Ordinarily, the growth of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But this is not always the case in hilly areas.
Dabancheng I (CPI) turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to every turbine site.