Burqin II (Huadian) wind project was installed in Xinjiang, China It was completed in 2013 and is owned by .
It is near about 10 km southeast from Burqin.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
A perfect destination for a project like Burqin II (Huadian) could have a near constant flow of non-turbulent wind year round, having a minimum probability of sudden powerful bursts of wind. An essential aspect of turbine siting is also access to local demand or transmission capaabout 10 km southeast from Burqin.
Before development, Burqin II (Huadian) was most likely screened on the basis of a wind atlas, and validated with wind measurements. However, Burqin II (Huadian) wind farm would have needed more than just meteorological data and measurements.
Site info around about 10 km southeast from Burqin is a major aspect in the development conclusion Local winds are often watched for a year or more, and detailed wind maps made before wind generators are set up.
Altitude would also have a part to performin a project like Burqin II (Huadian). This is because of drag The rise in velocity with altitude is most extraordinary at the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is altered by topography, surface and hurdles.
Generally, the increase of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect each other. But this is not always the way it is in hilly areas.
Individual turbines at Burqin II (Huadian) are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Burqin II (Huadian) wind farm
- Name: Burqin II (Huadian)
- Wind turbine Supplier: Sinovel Wind, Model: SL1500/82/HH70m/TCII , Units: 33,
- Country: China
- State: Xinjiang
- City: about 10 km southeast from Burqin