Beishileng wind project was installed in Hebei, China It was completed in 2011 and is owned by .
It is near Shangyi County.
See below for data.
In most cases, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The very best location for something like Beishileng would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine like involved if Beishileng was not built near local demand or transmission capaShangyi County.
During the planning stages the Beishileng wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Site information around Shangyi County would have been a major element in the development final decision Local winds are often monitored for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind blows speedier at higher altitudes due to the reduced influence of drag. The boost in velocity with altitude is most extraordinary close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is transformed by landscape, surface and obstacles.
Wind speeds increasing with altitude is part of a wind energy law. This Hebeis wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Beishileng are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is enhanced in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to every turbine site.