Beijiao wind project was installed in Fujian, China It was brought online in 2012 and is owned by .
It is near between Tailu Town and Huangqi Town, Lianjiang County.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The very best location for something such as Beijiao is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine like included if Beijiao was not built near local demand or transmission capabetween Tailu Town and Huangqi Town, Lianjiang County.
During the planning stages the Beijiao wind farm would have been checked and validated through wind measurements. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been important to determining site potential to be able to finance the project. Winds around between Tailu Town and Huangqi Town, Lianjiang County are evaluated for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is also more evident near land and is transformed by geography, surface and obstacles.
Almost always, the increase of wind speeds with raising height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. But this isn’t necessarily the situation in hilly areas.
Individual turbines at Beijiao are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is increased in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to each turbine site.
Facts about Beijiao wind farm
- Name: Beijiao
- Wind turbine
- Country: China
- Developer: Zhongmin WindPower
- State: Fujian
- City: between Tailu Town and Huangqi Town, Lianjiang County