It is near Rucheng.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best destination for something similar to Baiyunxian is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine China Energy Engineering Group (CEEC) like China Energy Engineering Group (CEEC) included if Baiyunxian was not built near local demand or transmission capaRucheng.
Before building, Baiyunxian was probably screened on the basis of a wind atlas, and validated with wind specifications. However, Baiyunxian wind farm might have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been essential to determining site potential as a way to finance the project. Local winds are often checked for a year or more, and detailed wind maps built before wind generators are set up.
Altitude would also possess a part to playwithin a project like Baiyunxian. This is because of drag The surge in velocity with altitude is most spectacular near the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is altered by landscape, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect each other. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Baiyunxian are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably roads to each and every turbine site.