It is near Jinchuan, Dali.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
An ideal position for a project like Baimaxueshan I might have a near constant flow of non-turbulent wind all year long, having a minimum chance of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine China Longyuan Power Group like China Longyuan Power Group involved if Baimaxueshan I was not built near local demand or transmission capaJinchuan, Dali.
Before development, Baimaxueshan I was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Site info around Jinchuan, Dali is a major factor in the ‘development’ final decision Winds around Jinchuan, Dali are analysed for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Baimaxueshan I. This is because of drag The surge in velocity with altitude is most extraordinary close to the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is changed by landscape, surface and obstacles.
Typically, the rise of wind speeds with growing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing increases placement, specially in hilly areas.
Individual turbines at Baimaxueshan I are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is increased in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.