It is near Aletai City.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A great position for a project like Aletai i could have a near constant flow of non-turbulent wind all year round, having a minimum chances of sudden powerful bursts of wind. Additionally, you would not get a turbine China Guangdong Nuclear Power (CGNP) like China Guangdong Nuclear Power (CGNP) associated if Aletai i was not built near local demand or transmission capaAletai City.
Before development, Aletai i was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Aletai i wind farm might have needed more than just meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been vital to determining site potential as a way to fund the project. Winds around Aletai City are analysed for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Aletai i. This is because of drag The increase in velocity with altitude is most spectacular near the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more obvious near land and is transformed by landscape, surface and hurdles.
Commonly, the increase of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the expected wind speeds by 10%, and the estimated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing maximizes placement, specifically in hilly areas.
Individual turbines at Aletai i are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each and every turbine site.