It is near Dzungarian Gate.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The very best destination for something like Alashankou III (Longyuan) would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine China Longyuan Power Group like China Longyuan Power Group associated if Alashankou III (Longyuan) was not built near local demand or transmission capaDzungarian Gate.
Before development, Alashankou III (Longyuan) was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Site info around Dzungarian Gate would have been a major aspect in the ‘development’ decision Winds around Dzungarian Gate are analysed for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind blows speedier at higher altitudes as a result of reduced effect of drag. The increase in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is more pronounced near land and is transformed by landscape, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Alashankou III (Longyuan) are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.