Des Moulins II wind farm is located in Québec, Canada. It was in fact brought online in 2014 and is owned by Invenergy.
It is near Kinnear’s Mills, Saint-Jean-de-Brébeuf and Thetford Mines municipalities.
See below for data.
As a rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or bigger.
A great position for a project like Des Moulins II could have a near constant flow of non-turbulent wind year round, with a minimum chances of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine Invenergy like Invenergy associated if Des Moulins II was not built near local demand or transmission capaKinnear’s Mills, Saint-Jean-de-Brébeuf and Thetford Mines municipalities.
Before building, Des Moulins II was almost certainly screened on the foundation of a wind atlas, and validated with wind measurements. However, Des Moulins II wind farm would have needed more than just meteorological data and measurements.
Site info around Kinnear’s Mills, Saint-Jean-de-Brébeuf and Thetford Mines municipalities is a major aspect in the development choice Local winds are often checked for a year or more, and comprehensive wind maps constructed before wind generators are set up.
The wind blows swifter at higher altitudes because of the reduced effect of drag. The boost in velocity with altitude is most spectacular at the surface and is impacted by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is changed by topography, surface and obstructions.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But this isn’t necessarily the case in hilly areas.
Individual turbines at Des Moulins II are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each turbine site.