Cypress Wind Power 2 wind project was installed in Saskatchewan, Canada It was created in 2003 and is owned by SaskPower.
It is near Swift Current.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something like Cypress Wind Power 2 would be a steady availability of non-turbulent wind. Additionally, you would not get a turbine SaskPower like SaskPower involved if Cypress Wind Power 2 was not built near local demand or transmission capaSwift Current.
Before development, Cypress Wind Power 2 was most likely screened on the foundation of a wind atlas, and validated with wind specifications. However, Cypress Wind Power 2 wind farm would have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been vital to determining site potential as a way to finance the project. Local winds are often examined for a year or more, and comprehensive wind maps built before wind generators are installed.
Altitude would also possess a part to performin a project like Cypress Wind Power 2. This is because of drag The surge in velocity with altitude is most extraordinary at the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more pronounced near land and is transformed by landscape, surface and hurdles.
Wind speeds raising with altitude is part of a wind energy law. This Saskatchewans wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Cypress Wind Power 2 are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is improved in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Cypress Wind Power 2 wind farm
- Name: Cypress Wind Power 2
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/ 2MW, Units: 23,
- Country: Canada
- Developer: SaskPower
- State: Saskatchewan
- City: Swift Current
- Owner: SaskPower