Cypress Wind Power 1 wind project was installed in Saskatchewan, Canada It was brought online in 2002 and is owned by SaskPower.
It is near Swift Current.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or greater.
The best destination for something like Cypress Wind Power 1 is a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine SaskPower like SaskPower associated if Cypress Wind Power 1 was not built near local demand or transmission capaSwift Current.
Before development, Cypress Wind Power 1 was probably screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential to be able to fund the project. Local winds are often examined for a year or more, and comprehensive wind maps constructed before wind generators are set up.
The wind blows quicker at higher altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is also more distinct near land and is changed by terrain, surface and obstacles.
Ordinarily, the increase of wind speeds with raising elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. However this is not always the way it is in hilly areas.
Cypress Wind Power 1 turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each turbine site.
Facts about Cypress Wind Power 1 wind farm
- Name: Cypress Wind Power 1
- Wind turbine Supplier: Nordex, Model: N80/ 2.5MW, Units: 6,
- Country: Canada
- Developer: SaskPower
- State: Saskatchewan
- City: Swift Current
- Owner: SaskPower