Cowley Ridge North wind project was installed in Alberta, Canada It was in fact brought online in 2001 and is owned by TransAlta.
It is near Pincher Creek.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A perfect place for a project like Cowley Ridge North would have a near constant flow of non-turbulent wind throughout the year, with a minimum probability of abrupt potent bursts of wind. An essential aspect of turbine siting is also admission to local demand or transmission capaPincher Creek.
During the planning stages the Cowley Ridge North wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not enough for precise siting of a large wind power project.
Site data around Pincher Creek is a major aspect in the development conclusion Local winds are often supervised for a year or more, and detailed wind maps built before wind generators are set up.
Altitude would also possess a part to playwithin a project like Cowley Ridge North. This is due to drag The surge in velocity with altitude is most remarkable at the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more obvious near land and is transformed by topography, surface and obstructions.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect each other. But micrositing maximizes placement, particularly in hilly areas.
Cowley Ridge North turbines are connected via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each and every turbine site.