CAW wind project was set up in Ontario, Canada It was in fact brought online in 2013 and is owned by Unifor.
It is near Port Elgin.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for something such as CAW would be a steady supply of non-turbulent wind. An important factor of turbine siting is furthermore admittance to local demand or transmission capaPort Elgin.
During the planning stages the CAW wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been vital to determining site potential as a way to fund the project. Winds around Port Elgin are evaluated for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like CAW. This is because of drag The boost in velocity with altitude is most dramatic near the surface and is affected by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and is also more distinct near land and is changed by geography, surface and limitations.
Typically, the growth of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, raises the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect one another. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at CAW are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to every turbine site.
Facts about CAW wind farm
- Name: CAW
- Wind turbine Supplier: Gamesa, Model: G87/2000, Units: 14,
- Country: Canada
- State: Ontario
- City: Port Elgin
- Owner: Unifor