Brookfield wind project was set up in Nova Scotia, Canada It was created in 2005 and is owned by RESL (Renewable Energy Services Limited).
It is near Brookfield.
See below for data.
For the most part, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
The best place for a project like Brookfield could have a near constant flow of non-turbulent wind year round, with a minimum likelihood of sudden effective bursts of wind. Additionally, you wouldn’t get a turbine RESL (Renewable Energy Services Limited) like RESL (Renewable Energy Services Limited) included if Brookfield was not built near local demand or transmission capaBrookfield.
Before development, Brookfield was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Site data around Brookfield would have been a major factor in the development choice Winds around Brookfield are analysed for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind blows swifter at greater altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most spectacular near the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is also more pronounced near land and is changed by geography, surface and limitations.
Generally, the rise of wind speeds with raising elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. But this might not be the situation in hilly areas.
Brookfield turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is enhanced in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to every turbine site.
Facts about Brookfield wind farm
- Name: Brookfield
- Wind turbine Supplier: Enercon, Model: E44/600, Units: 2,
- Country: Canada
- Developer: RESL (Renewable Energy Services Limited)
- State: Nova Scotia
- City: Brookfield
- Owner: RESL (Renewable Energy Services Limited)