Brooke-Alvinston (Zephyr) wind project was set up in Ontario, Canada It was in fact brought online in 2012 and is owned by Schneider Power.
It is near southwest of Watford between Ebenezer and Old Walnut roads, just south of Churchill Line, in Brooke-Alvinston Township, Lambton County.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best place for a project like Brooke-Alvinston (Zephyr) might have a near constant flow of non-turbulent wind year round, having a minimum chances of abrupt effective bursts of wind. Additionally, you would not get a turbine Schneider Power like Schneider Power involved if Brooke-Alvinston (Zephyr) was not built near local demand or transmission capasouthwest of Watford between Ebenezer and Old Walnut roads, just south of Churchill Line, in Brooke-Alvinston Township, Lambton County.
During the planning stages the Brooke-Alvinston (Zephyr) wind farm would have been checked and validated through wind measurements. However, Brooke-Alvinston (Zephyr) wind farm might have needed more than just meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been important to determining site potential as a way to finance the project. Local winds are frequently examined for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also possess a part to playwithin a project like Brooke-Alvinston (Zephyr). This is because of drag The boost in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is altered by topography, surface and limitations.
Wind speeds raising with altitude is part of a wind energy law. This Ontarios wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing optimizes placement, specifically in hilly areas.
Brooke-Alvinston (Zephyr) turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is increased in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Brooke-Alvinston (Zephyr) wind farm
- Name: Brooke-Alvinston (Zephyr)
- Wind turbine Supplier: Enercon, Model: E40/500, Units: 5,
- Country: Canada
- Developer: Green Breeze, Inc.
- State: Ontario
- City: southwest of Watford between Ebenezer and Old Walnut roads, just south of Churchill Line, in Brooke-Alvinston Township, Lambton County
- Owner: Schneider Power