Box Springs wind project was installed in Alberta, Canada It was finished in 2014 and is owned by WindRiver Power Corp..
It is near Medicine Hat.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A perfect place for a project like Box Springs might have a near constant flow of non-turbulent wind all year long, with a minimum probability of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine WindRiver Power Corp. like WindRiver Power Corp. associated if Box Springs was not built near local demand or transmission capaMedicine Hat.
During the planning stages the Box Springs wind farm would have been checked and confirmed through wind measurements. However, Box Springs wind farm might have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been crucial to determining site potential as a way to fund the project. Winds around Medicine Hat are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playwithin a project like Box Springs. This is due to drag The increase in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more evident near land and is transformed by terrain, surface and obstacles.
Commonly, the rise of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, enhances the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. However this is not always the situation in hilly areas.
Individual turbines at Box Springs are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is improved in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.
Facts about Box Springs wind farm
- Name: Box Springs
- Wind turbine Supplier: Enercon, Model: E-53/800, Units: 1,
- Country: Canada
- Developer: WindRiver Power Corp.
- State: Alberta
- City: Medicine Hat
- Owner: WindRiver Power Corp.