Black Pond Community Wind Project wind project was set up in Nova Scotia, Canada It was created in 2015 and is owned by Scotian WindFields.
It is near near Upper Wedgeport, in the Municipality of the District of Argyle.
See below for data.
For the most part, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or larger.
An ideal place for a project like Black Pond Community Wind Project might have a near constant flow of non-turbulent wind all year round, having a minimum chance of abrupt powerful bursts of wind. An essential aspect of turbine siting is moreover access to local demand or transmission capanear Upper Wedgeport, in the Municipality of the District of Argyle.
During the planning stages the Black Pond Community Wind Project wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Site data around near Upper Wedgeport, in the Municipality of the District of Argyle is a major element in the development choice Winds around near Upper Wedgeport, in the Municipality of the District of Argyle are evaluated for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Black Pond Community Wind Project. This is due to drag The surge in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is transformed by topography, surface and obstructions.
Usually, the rise of wind speeds with growing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect one another. But this isn’t necessarily the way it is in hilly areas.
Individual turbines at Black Pond Community Wind Project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Black Pond Community Wind Project wind farm
- Name: Black Pond Community Wind Project
- Wind turbine Supplier: Siemens, Model: SWT1.3-62, Units: 22,
- Country: Canada
- Developer: Scotian WindFields
- State: Nova Scotia
- City: near Upper Wedgeport, in the Municipality of the District of Argyle
- Owner: Scotian WindFields