Caetité 2 wind farm is located in Bahía, Brazil. It was in fact brought online in 2014 and is owned by .
It is near Caetité.
See below for data.
Generally speaking, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or higher.
An ideal place for a project like Caetité 2 would have a near constant flow of non-turbulent wind all year round, having a minimum probability of sudden effective bursts of wind. An essential aspect of turbine siting is also admission to local demand or transmission capaCaetité.
During the planning stages the Caetité 2 wind farm would have been checked and authenticated through wind measurements. However, Caetité 2 wind farm would have needed more than merely meteorological data and measurements.
Site information around Caetité would have been a major factor in the ‘development’ choice Winds around Caetité are examined for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to performwithin a project like Caetité 2. This is due to drag The increase in velocity with altitude is most remarkable close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is also more obvious near land and is changed by terrain, surface and hurdles.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. However this isn’t necessarily the way it is in hilly areas.
Caetité 2 turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably roads to each and every turbine site.