Asa Branca I wind project was set up in Río Grande do Norte, Brazil It was created in 2015 and is owned by Companhia Paranaense de Energia (Copel).
It is near Parazinho.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The best location for something such as Asa Branca I is a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine Companhia Paranaense de Energia (Copel) like Companhia Paranaense de Energia (Copel) included if Asa Branca I was not built near local demand or transmission capaParazinho.
During the planning stages the Asa Branca I wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been important to determining site potential in order to finance the project. Local winds are often checked for a year or more, and comprehensive wind maps built before wind generators are set up.
Altitude would also possess a part to performwithin a project like Asa Branca I. This is because of drag The boost in velocity with altitude is most dramatic near the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more evident near land and is altered by terrain, surface and hurdles.
Usually, the rise of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, enhances the expected wind speeds by 10%, and the expected power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Asa Branca I are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.
Facts about Asa Branca I wind farm
- Name: Asa Branca I
- Wind turbine Supplier: Alstom, Model: ECO 122-2.7MW, Units: 10,
- Country: Brazil
- Developer: Companhia Paranaense de Energia (Copel), Salus, Casa dos Ventos
- State: Río Grande do Norte
- City: Parazinho
- Owner: Companhia Paranaense de Energia (Copel)