Eeklo wind farm is situated in West Flanders, Belgium. It was in fact brought online in 2012 and is owned by Eneco.
It is near Eeklo.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something similar to Eeklo would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine Eneco like Eneco involved if Eeklo was not built near local demand or transmission capaEeklo.
During the planning stages the Eeklo wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Site data around Eeklo is a major element in the development decision Winds around Eeklo are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playwithin a project like Eeklo. This is due to drag The increase in velocity with altitude is most remarkable close to the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is more evident near land and is altered by terrain, surface and obstacles.
Commonly, the rise of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the predicted wind speeds by 10%, and the expected power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. However this is not always the situation in hilly areas.
Individual turbines at Eeklo are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to every turbine site.
Facts about Eeklo wind farm
- Name: Eeklo
- Wind turbine Supplier: Enercon, Model: E70/2300, Units: 18,
- Country: Belgium
- State: West Flanders
- City: Eeklo
- Owner: Eneco