Diest Bekkevoort wind project was set up in Flemish Brabant, Belgium It was completed in 2011 and is owned by Aspiravi.
It is near Diest and Bekkevoort.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The very best destination for something like Diest Bekkevoort would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is also admission to local requirement or transmission capaDiest and Bekkevoort.
During the planning stages the Diest Bekkevoort wind farm would have been checked and confirmed through wind measurements. However, Diest Bekkevoort wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been imperative to determining site potential in order to finance the project. Local winds are frequently supervised for a year or more, and comprehensive wind maps built before wind generators are installed.
The wind blows speedier at higher altitudes because of the reduced effect of drag. The rise in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is altered by terrain, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this isn’t necessarily the way it is in hilly areas.
Individual turbines at Diest Bekkevoort are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and probably roads to each and every turbine site.
Facts about Diest Bekkevoort wind farm
- Name: Diest Bekkevoort
- Wind turbine Supplier: Vestas Wind Systems, Model: V82/1500, Units: 1,
- Country: Belgium
- Developer: Aspiravi
- State: Flemish Brabant
- City: Diest and Bekkevoort
- Owner: Aspiravi