Berlare wind farm is situated in East Flanders, Belgium. It was created in 2012 and is owned by Electrawinds.
It is near Berlare, along E17 motorway.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A perfect place for a project like Berlare could have a near constant flow of non-turbulent wind year round, with a minimum chances of abrupt effective bursts of wind. Additionally, you wouldn’t get a turbine Electrawinds like Electrawinds associated if Berlare was not built near local demand or transmission capaBerlare, along E17 motorway.
During the planning stages the Berlare wind farm would’ve been checked and endorsed through wind measurements. Meteorological wind data alone is usually not enough for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been essential to determining site potential to be able to finance the project. Winds around Berlare, along E17 motorway are evaluated for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows more rapidly at higher altitudes as a result of reduced influence of drag. The increase in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is transformed by geography, surface and obstacles.
Generally, the rise of wind speeds with growing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. However this might not be the way it is in hilly areas.
Individual turbines at Berlare are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is elevated in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Berlare wind farm
- Name: Berlare
- Wind turbine Supplier: Gamesa, Model: 1.5MW, Units: 10,
- Country: Belgium
- Developer: Electrawinds
- State: East Flanders
- City: Berlare, along E17 motorway
- Owner: Electrawinds