Bluff Point wind project was set up in Tasmania, Australia It was in fact brought online in 2004 and is owned by Hydro Tasmania, Shenhua Group.
It is near Woolnorth grazing property.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
An ideal place for a project like Bluff Point might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of abrupt potent bursts of wind. An important factor of turbine siting is also access to local requirement or transmission capaWoolnorth grazing property.
During the planning stages the Bluff Point wind farm would’ve been checked and authenticated through wind measurements. However, Bluff Point wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential in order to fund the project. Local winds are often supervised for a year or more, and detailed wind maps created before wind generators are set up.
Altitude would also possess a part to playin a project like Bluff Point. This is because of drag The boost in velocity with altitude is most extraordinary close to the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more pronounced near land and is changed by geography, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Bluff Point are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each and every turbine site.
Facts about Bluff Point wind farm
- Name: Bluff Point
- Wind turbine Supplier: Suzlon Energy, Model: S88/2100, Units: 27,
- Country: Australia
- State: Tasmania
- City: Woolnorth grazing property
- Owner: Hydro Tasmania, Shenhua Group